Binders for foundry industry



Since 2009 "Khimlex" company has produced binders for foundry industry «Lexelit» for CO2 and for cold hardening resin binders process
The aim of the production is to replace foreign-made products. Our products have been successfully testified at a few domestic enterprises in the foundry industry.
It is supplied to LLC «NPP Technology», JSC «Azovelectrostal», LLC«Polihim», JSC «Stal» etc.

 

 

Lexelit-a-set – is a foundry binder for alfa-set process.

En

TU U 24.1-24514086-019: 2010

The conclusion of the State Sanitary and Epidemiological Expertise No. 05.03.02-04/100615 of December 17, 2010

Binder Lekselite - an alpha-set intended for use in foundries during the manufacture of cold-hardening curing formations, compounded by esters.

Binder Lekselite - an alpha-set represents an aqueous solution of potassium polyphenolate.

 

Specifications of Lekselite-α -set

Index name

Norm

Appearance

Homogeneous liquid of red-brown color without mechanical impurities

The viscosity is conditional at (20 ± 0.5)°C according to the viscosimeter VZ-246 (diameter of the nozzle 4 mm), s

35 - 65

Refractive index

1,496 – 1,509

Mass fraction of free formaldehyde,%, not more than

0,1

The ultimate tensile strength of samples made of sand-resin mixture (*), after exposure to air at a temperature of (18-22)°C for:

– 1 hour, МPа (kgf/cm2), not less than
– 2 hours, МPа (kgf/cm2), not less than

 

– 0,35 (3,5)
– 0,45 (4,5)

 

Before use, the resin should be thoroughly mixed, at an elevated temperature (during the hot season), it should be cooled to a temperature of + 25°C, and when it enters the frozen state, it should be kept in a warm room until it reaches a temperature of +25°C. Forced warm-up is not allowed.

 

Sales department:

Zaporozhye: + 38 (061) 213-35-76, 213-35-78

E-mail: lkm@khimlex.ua